The kids from primary school De Boschuil built 300 fanbots (celebrating carnival)!
See also the KekkeTek facebook page
Building another 300 fanbots
Program your Fanbot Brain with Blockly!
BlocklyMBED compiler
You can program your fanbot with your own program!
Just insert the Fanbot brain in your PC while you press it’s “nose” and you will see a USB disk appear.
Now make your program here: Blockly Fanbot Compiler page
Press “Compile” and save the “firmware.bin” file on your Fanbot. Unplug your fanbot USB, plug it back in and see your program in action. (Note: downloading the file only works under Windows, and a modern browser is required with JavaScript enabled).
Video of the fanbots in Action
Do you want to see all Fanbot’s in action, during the final games?
See this video:
A longer video with a presentation of the workshop is found here:
Meet Robin: The CAPS-LOCK indicating robotic helper
Are you struggling to see if your caps-lock is enabled? Typing in incorrect passwords, because of this? Robin can be of assistance. He will also warn you if you are toggling caps-lock to quickly.
He was created by mashing up the Fanbot controller and a cardboard kit of Robin the mascot of robocup2013. A speaker and an extra servo was added. The cardboard kit was reinforced with some thicker board, and glued together. A bit of lead in his legs made him stand up stable enough. The software for his brain can be found here. If you are interested in the source code: take a look here.
Robin’s cardboard kit
The Fanbot brain in Robin’s head
Finished robot
See a movie of Robin in action: http://youtu.be/L39hJ2yuynk
New tricks for your FanBot
The fanbot brain can do more!
There is an updated software version. The new updated software will allow your fanbot to move continuously, do random moves and smooth motion back and forth. See here how to install the new software on the brain.
Front side of the FanBot brain PCB
Fanbots collected by their makers
Almost a half of all the fanbots where collected by their makers (or their grandparents) or send home
Fanbot programming software
Fanbot software
The software to program the fanbot can be found here (for Windows only).
Save the fanbot.zip file and unzip the files. Run: Sises.FanBot.View.exe
Press the “nose” to run your program (the software nose or the nose button on your fanbot)
When you get the messages “no fanbot found” (and you do have a fanbot connected) you may need to install: “Microsoft C++ Redistributable Package 2012 (x86) VSU3\vcredist_x86.exe).
Robocup2013 is over! 700 FanBots built.
The Mayor of Eindhoven in front of 700 FanBots
Photo: Bart van Overbeeke (bvof.nl) — CC-BY
At the end of Robocup 2013, the stand was crowded and the robots all cheered for the final match.The breathtaking match between The Netherlands and China ended in a victory for China, but i
t was a close call. The Fanbots where positioned right behind the goal. Luckily no balls where shot into t
he crowd, so there where no injuries amongst the Robot Fans. Tomorrow they all find a home with their makers.
700 Fanbots cheering during the match.
Photo: Bart van de Overbeeke (bvof.nl) — CC-BY
It was a great event!
The final counter at the last day. Almost 700 robots registered.
- Developers posing for the fanbots
It is starting to get crowded!
The fanbot workshop
The event is almost over! Tomorrow the finals are played on the main field. The FanBots acquired front row seats! There is place for a few more, but is starting to get crowded.
We thank all the participants for making all the fanbots and hope you will collect them after the event.
growing fanbot-league at RoboCup 2013 in Eindhoven (NL)
Photo: Bart van Overbeeke (bvof.nl) — CC-BY
- 600 fanbots
